IBM MQ

Monitor performance of your IBM MQ queue manager objects.

Extension

Product information
Release notes

Overview

On this new version of this popular extension, collect performance metrics from your queue managers running locally on your OneAgent host or remotely from your ActiveGates. Capture metadata and new metrics on this version.

Metrics

Queue manager

Availability: Percentage of time queue manager was reachable and available to this extension. While a queue manager sometimes may be up and running, availability is within the context of this extension.
Uptime: Time in seconds since last time queue manager started
Connections: Number of active connections to queue manager
Queues count: Number of queues being monitored by the extension
DLQ depth: If DLQ is enabled, number of messages in dead letter queue
Active channels: Number of channels in an active state
Log utilization (Distributed only): Percentage estimate of how well the queue manager workload is contained within the primary log space
Log in use (Distributed only): Percentage of the primary log space in use for restart recovery
Log archive size (Distributed only): Amount of space occupied, in megabytes, by log extents no longer required for restart or media recovery, but waiting to be archived.
Log reuse size (Distributed only): Amount of space occupied, in megabytes, by log extents available to be reused.
Total log data sets (z/OS only): The total number of active log data sets.
Full log data sets (z/OS only): The total number of full active log data sets that have not yet been archived.

Queues

Depth: Number of messages in queue
Depth percentage: Percentage of messages filling up queue
Inhibit GET: Whether queue inhibits MQGET
Inhibit PUT: Whether queue inhibits MQPUT
Open input handles: Number of handles opened by applications for input
Open output handles: Number of handles opened by applications for output
Uncommitted messages: Number of uncommitted changes (puts and gets) pending for the queue

In order to retrieve the following metrics, queue monitoring must be enabled on queues. Any monitoring resolution will start collecting these statistics.

Oldest message: Age in seconds of the oldest message on the queue.
Last GET: Time at which the last message was successfully read from the queue.
Last PUT: Time at which the last message was successfully put in queue.
Short time indicator: Amount of time that a message spent on the queue over a short period.
Long time indicator: Amount of time that a message spent on the queue over a long period.

In order to retrieve the following metrics, statistics on queues are reset. To reset them, CHG permission must be granted to queues

Enqueue count: Number of messages enqueued. This count includes messages that have been put to the queue, but have not yet been committed.
Dequeue count: Number of messages dequeued. This count includes messages that have been successfully retrieved (with a nonbrowse MQGET) from the queue, even though the MQGET has not yet been committed.
Enqueue rate: Number of messages enqueued per second.
Dequeue rate: Number of messages dequeued per second.

Channels:

Messages: Number of messages sent or received, or number of MQI calls handled.
Bytes sent: Number of bytes sent
Bytes received: Number of bytes received
Buffers sent: Number of buffers sent.
Buffers received: Number of buffers received.
Last message sent: Time when last message was sent, or MQI call was handled
In-doubt: Whether the channel is currently in doubt. 0 = No. 1 = Yes
In-doubt messages: Number of messages in-doubt
Current shared conversations: Number of conversations currently active on this channel instance. This parameter is returned only for TCP/IP server-connection channels.
Channel instances: Number of instances of this channel. This metric is only available to server-connection channels.
Batches: Number of completed batches
Network time short: Amount of time, in microseconds, to send an end of batch request to the remote end of the channel and receive a response over a short period.
Network time long: Amount of time, in microseconds, to send an end of batch request to the remote end of the channel and receive a response over a longer period.
XMIT queue time short: Time, in microseconds, that messages remained on the transmission queue before being retrieved over a short period.
XMIT queue time long: Time, in microseconds, that messages remained on the transmission queue before being retrieved over a longer period.
Channel status: Used to round up channel status counts for alerting and charting purposes
Long retries left: Number of long retry attempts remaining
Short retries left: Number of short retry attempts remaining

Listeners

Availability: Percentage this listener was running and available.

Topics

Publish count: The number of applications currently publishing to the topic.
Subcription count: The number of subscribers for this topic string, including durable subscribers who are not currently connected.
Inhibit publish: Whether publishes are not allowed
Inhibit subscription: Whether subscriptions are not allowed

Usage (z/OS only)

Total pages: The total number of 4 KB pages in the page set.
Expanded count: The number of times the page set has been dynamically expanded since restart.
Unused pages: The number of pages that are not used (that is, available page sets).
Persistent data pages: The number of pages holding persistent data.
Non-persistent data pages: The number of pages holding nonpersistent data.
Free pool buffers: Number of free buffers in buffer pool.
Percent free pool buffers: Number of free buffers as a percentage of all buffers in the buffer pool.
Total pool buffers: The number of buffers defined for specified buffer pool.

Get started

Requirements:

OneAgent deployment: (For ActiveGate deployment, continue below)

OneAgent for Windows or Linux only.
OneAgent must be running and monitoring queue manager processes.
Dynatrace version 1.269+
IBM MQ 9.1+. IBM dropped support to 9.0.x in 2021.
IBM MQ Command server must be running on queue managers
MQ Libraries must be in PATH on Windows or LD_LIBRARY_PATH on Linux. User running extension must be able to find these libraries.

Additional requirements for Linux systems:
User running the OneAgent (dtuser by default) must also have read access to the queue manager directories /var/mqm/qmgrs/<queue_manager> and read/write to log directories /var/mqm/log so that it can bind properly.
Ensure MQ libraries are accessible by dtuser or whichever user your OneAgent service is running under. Default location for these libraries is /opt/mqm/lib64
By default, IBM MQ installs an ldconfig file called /etc/ld.so.conf.d/mqm.conf that adds /usr/lib64 to the LD_LIBRARY_PATH. Make sure IBM MQ library symbolic links to /opt/mqm/lib64 are found in that path. If there is no reference in /usr/lib64 to /opt/mqm/lib64 libraries, you may have to create your own .conf file and place it in /etc/ld.so.conf.d/.
Using ldconfig will allow the MQ libraries to be loaded by default. To do this you can do the following:
- Create a .conf file in /etc/ld.so.conf.d/ with any name. Example: ibmmq_ext.conf
- Inside that file, enter the location for the IBM MQ libraries: /opt/mqm/lib64
- Save the file
- Reload ldconfig by running command: ldconfig

ActiveGate deployment:

ActiveGates on Windows or Linux
Dynatrace version 1.269+
IBM MQ 9.1+. IBM dropped support to 9.0.x since 2021.
IBM MQ Command server must be running on queue managers.
IBM MQ running on AIX, z/OS, Linux, Windows, zLinux, MQ Appliance are supported. While it may work on other OS, they may not be officially supported.
Server-connection channel to communicate with each queue manager. This is require for any Client connection to IBM MQ.
Firewall from ActiveGates to queue managers must be open. Queue manager could run on any port so ensure those ports are open from your ActiveGates. Consult with your MQ administrator to know those ports.

Authentication:

IBM MQ has several ways to authenticate client and local connections. This is determined by the administrator of your MQ environment according to their own security policies.

User authentication depends on Channel Authentication (CHLAUTH) configuration. If disabled or ADOPTCTX is disabled, IBM MQ will attempt to authenticate the user running the extension process, not the user passed in the endpoint configuration.

When ADOPTCTX is enabled and CHLAUTH is enabled, the user and password combination entered in the endpoint is passed in a MQCSP block that IBM MQ will attempt to authenticate.

Please take this into consideration when authenticating users or if you receive unauthorized errors.

User permissions to MQ objects (Distributed)

IBM MQ extension permissions

CHG permission is only required if collecting Enqueue/Dequeue metrics. Enqueue/Dequeue metrics can only be obtained after issuing RESET_Q_STATISTICS command, therefore needing CHG permissions. If you cannot provide this permission, make sure you deselect those metrics on Feature Sets page of your monitoring configuration.

User permissions to MQ objects (z/OS)

IBM MQ extension permissions for z/OS Note:

CONTROL permission is only required if collecting Enqueue/Dequeue metrics.

Dynatrace configuration

Under Extensions on the left menu, select IBM MQ.

Add a monitoring configuration.

OneAgent deployment, also referred as "Local", can run on a specific host, host groups, hosts in a management zone or tagged hosts. ActiveGate deployment, also referred as "Remote", runs on ActiveGate groups. Groups can one or multiple ActiveGates for more reliability.

For Local (OneAgent) deployment:

Select which hosts will run this extension
- Log level: Enable DEBUG only when troubleshooting or support makes that recommendation.
- Add a Queue Manager: Any queue managers matching its filter will use this configuration. You may create one separate configuration per queue manager on host, or one configuration for all queue managers on that host.
- Queue manager filter: A name matching this filter will be matched against running processes on this host. If a name matches this filter, all settings on this configuration endpoint will apply to it.
- Use credential vault: This will allow you to select a username/password credential stored on Dynatrace's Credential Vault. Using this feature will ignore any username/password entered manually and instead will only use the credential stored in the vault.
- User: Optional but recommended to add a user. Otherwise, if left blank, IBM MQ will try to authenticate user running process, dtuser by default.
- Password: Password to user above.
- Objects to monitor: Two methods of adding objects.
  - Using new wizard mode, just click buttons to enter rules. If there is an object you absolutely do not want to monitor then remove that rule.
  - Advanced mode, add filters in a comma-separated fashion under each tab. Hover your mouse over the (i) icon next to each object type for rules and examples.
  - Note: Rules are evaluated in sequential order. This way you can include or exclude objects from the previous rule result. For example: *, -SYSTEM.*, SYSTEM.CLUSTER* would include all queues, then remove those that start with SYSTEM. then include those that start with SYSTEM.CLUSTER. Pay close attention to the order you enter your rules, whether in Wizard or Advanced mode.
- Send log event on Dead letter queue: Enable this if you would like any DLQ on any queue manager matching this configuration to trigger a log event indicating that the number of messages in DLQ exceeded threshold. You may create an alert based on that log event
- Send log event on high queue depth from queue manager: Enable this if you would like any matching queue on any queue manager in this configuration to trigger a log event when its configured depth threshold is exceeded. This threshold is configured on IBM MQ.
- Send log event on low queue depth from queue manager: Enable this if you would like any matching queue on any queue manager in this configuration to trigger a log event when its configured depth lower than threshold. This threshold is configured on IBM MQ.
- Retrieve topology for improved transaction tracing: Enabling this setting will collect mappings for alias queues, remote queues, and cluster queues. This mapping is then sent to Dynatrace to complement mapping information for improved transaction tracing. You may only need to collect this once unless your mappings on IBM MQ change frequently. When enabled, enter a Dynatrace token to communicate with the API with these permission: Read settings, Write settings.
- Rename Queue managers: Enabling this setting will allow you to add an alias to queue managers matching your queue manager filter (above). The real queue manager name will still be included in the name. This is only to differentiate queue managers with similar or same names on Dynatrace. This will not rename any queue manager on IBM MQ.
- Inquire metrics in bulk: Enabling this setting will reduce the number of requests to IBM MQ and collect metrics for queues and channels in less requests thus reducing time and potential CPU overhead. However, this setting will require granting permissions to all queues and all channels, even SYSTEM objects too. This setting is not suitable for large environments with a large amount of queues or channels.
- Lastly, select which feature sets (metric groups) you would like this configuration to collect. Selecting too few will not give you the proper visibility and you may miss out on important performance data, as well as key indicators that can be correlated between different objects.

IBM MQ Local monitoring configuration

For Remote (ActiveGate) deployment:

Select which ActiveGate group will run this extension
- Log level: Enable DEBUG only when troubleshooting or support makes that recommendation.
- Task bucket size: By default, all endpoints defined in a monitoring configuration create a task. Use this setting to create separate tasks for groups of endpoints defined in a monitoring configuration. This will allow you to optimize resource usage on your ActiveGate and potentially distribute execution across other ActiveGates in your group.
- Add a Queue Manager: Click on this button for each queue manager you want to connect. Multiple queue managers per ActiveGate group is recommended.
- Comma-separated hosts: Most queue managers run on a single host but there are times you have multi-instance queue managers that run across multiple hosts. Enter that single host and port here, or the comma-separated list of host and ports for that one queue manager.
- Queue manager name: Enter the name of the single queue manager you are connecting to. This is required.
- Server-connection channel: Any client application, such as this extension, that connects to IBM MQ must talk to the queue manager via a channel. Enter the name of that Server-connection channel here.
- Use credential vault: This will allow you to select a username/password credential stored on Dynatrace's Credential Vault. Using this feature will ignore any username/password entered manually and instead will only use the credential stored in the vault.
- Username: Optional but recommended to add a user. A user is always passed, but depending on the queue manager configuration on IBM MQ, it can be ignored or this user in this field can be authenticated. It is best to always enter a user.
- Password: Password to user above.
- Model queue: Optional. If not set, it will use the SYSTEM default model queue for command requests and responses.
- Reply prefix: If you entered a model queue, you must enter a prefix for the reply queue.
- Objects to monitor: Two methods of adding objects.
  - Using new wizard mode, just click buttons to enter rules. If there is an object you absolutely do not want to monitor then remove that rule.
  - Advanced mode, add filters in a comma-separated fashion under each tab. Hover your mouse over the (i) icon next to each object type for rules and examples.
  - Note: Rules are evaluated in sequential order. This way you can include or exclude objects from the previous rule result. For example: *, -SYSTEM.*, SYSTEM.CLUSTER* would include all queues, then remove those that start with SYSTEM. then include those that start with SYSTEM.CLUSTER. Pay close attention to the order you enter your rules, whether in Wizard or Advanced mode.
- Send log event on Dead letter queue: Enable this if you would like any DLQ on any queue manager matching this configuration to trigger a log event indicating that the number of messages in DLQ exceeded threshold. You may create an alert based on that log event
- Send log event on high queue depth from queue manager: Enable this if you would like any matching queue on any queue manager in this configuration to trigger a log event when its configured depth threshold is exceeded. This threshold is configured on IBM MQ.
- Send log event on low queue depth from queue manager: Enable this if you would like any matching queue on any queue manager in this configuration to trigger a log event when its configured depth lower than threshold. This threshold is configured on IBM MQ.
- Retrieve topology for improved transaction tracing: Enabling this setting will collect mappings for alias queues, remote queues, and cluster queues. This mapping is then sent to Dynatrace to complement mapping information for improved transaction tracing. You may only need to collect this once unless your mappings on IBM MQ change frequently. When enabled, enter a Dynatrace token to communicate with the API with these permission: Read settings, Write settings.
- Rename Queue manager: Enabling this setting will allow you to add an alias to the queue manager defined above. The real queue manager name will still be included in the name. This is only to differentiate queue managers with similar or same names on Dynatrace. This will not rename any queue manager on IBM MQ.

IBM MQ Remote monitoring configuration

Inquire metrics in bulk: Enabling this setting will reduce the number of requests to IBM MQ and collect metrics for queues and channels in less requests thus reducing time and potential CPU overhead. However, this setting will require granting permissions to all queues and all channels, even SYSTEM objects too. This setting is not suitable for large environments with a large amount of queues or channels.
Disable auto-alerting: Automatic problem creation to failures will be disabled. Errors will still be logged as events but will not trigger problems. If you wish to create problems then you would have to create rules to trigger them from log events.
Lastly, select which feature sets (metric groups) you would like this configuration to collect. Selecting too few will not give you the proper visibility and you may miss out on important performance data, as well as key indicators that can be correlated between different objects.

FAQ and Troubleshooting

How many DDUs will it consume per year?

The following is an approximation. Metrics change depending on type of objects. Some metrics are not available to all channels, some metrics are not available to all queues.

Assuming you get all metrics for all objects: ((10) + (Local queues * 16) + (Alias + Remote queues) * 2 + (Channels * 18) + (Listeners) + (Topics * 4)) * Queue managers * 525.6 = DDUs per year

For example:

1      Queue manager
400    Local queues
20     Alias and remote queues
50     Channels
1      Listener
50     Topics

( 10 + (400 * 16) + (20 * 2) + (50 * 18) + (1 * 1) + (50 * 4) ) * 1 * 525.6 =
(10 + 6400 + 40 + 900 + 1 + 200)  * 525.6 = approximately 3.9M DDUs per year

I am not seeing all queue metrics

Some metrics depend on the type of queues. Other metrics depend on your queue manager configuration and if your user has enough permissions to collect them.

Are you missing Enqueue and Dequeue? Make sure your user has CHG permission on queues to reset statistics on queues. Only then you can receive Enqueue and Dequeue metrics.
Are you missing Oldest message and Last get/put? Make sure Monitoring statistics is enabled on your queue manager for all queues.
Are you looking at Alias or Remote queues? Only Locally defined queues have status metrics. Alias and Remote only have Inhibit GET/PUT metrics.
I keep getting Unauthorized errors but I know my user is correct

Check the AMQERR01.LOG on the queue manager itself. This log file will tell you what it tried to authenticate and what permissions you are missing. If you are unable to connect to your queue manager, make sure that either the user running the extension process has permissions to the queue manager, or ADOPTCTX and CHLAUTH is enabled so that it can authenticate the user and password combination passed in the MQCSP block.

I get a pymqe error saying libmqm_r.so not found

This means that the IBM MQ libraries were not found in the unix PATH. Make sure you follow the ldconfig step above under Local deployment

Other common errors and their meanings

MQRC_HOST_NOT_AVAILABLE: Queue manager is not reachable from your ActiveGate. This usually means a firewall rule is missing. Because a queue manager can run on a custom port, you must make sure that host:port is reachable from the ActiveGate running the extension.

MQRC_NO_MSG_AVAILABLE: It took too long to get a response back from your queue manager and the response was blank. This can happen if the MAX LENGTH size of your reply queue is not enough to fit the response payload. You can try increasing that value. It may also be caused because of a timeout or the queue manager did not respond in time.

MQRC_CONNECTION_BROKEN: The connection to the queue manager is severed either due to a network interruption or the queue manager closed it. Make sure your network performance is optimal. Also, if you are using SSL, make sure that you are not using an older TLS cipher that requires manual reset of TLS keys such as TLS 1.2 AES-GCM ciphers. Switch to a TLS 1.3 Cipher that has automatic TLS keys reset.

Screenshots

Health overview dashboard Queue manager overview Alias queues Topics overview Queue manager properties Queue performance Channel performance Topics performance Host screen outlining queue managers on that host

Subscribe to new releases

Copy to clipboard

Extension content

Content typeNumber of items included

screen injections

2

screen layout

9

screen logs cards

1

screen entities lists

31

list screen layout

9

screen chart groups

17

generic relationship

17

screen health cards

1

screen events cards

1

metric metadata

61

screen metric tables

1

screen actions

10

generic type

9

dashboards

1

screen properties

9

screen message cards

14

metric query

4

alerts

8

Feature sets

Below is a complete list of the feature sets provided in this version. To ensure a good fit for your needs, individual feature sets can be activated and deactivated by your administrator during configuration.

Feature setsNumber of metrics included

Metric name	Metric key	Description	Unit
Inhibit publish	ibmmq.topic.inhibit_pub	Whether publishes are not allowed	Unspecified
Inhibit subscription	ibmmq.topic.inhibit_sub	Whether subscriptions are not allowed	Unspecified

Metric name	Metric key	Description	Unit
Connections	ibmmq.queue_manager.connections	Number of active connections to queue manager	Count
Queues count	ibmmq.queue_manager.monitored_queues	Number of monitored queues	Count
DLQ depth	ibmmq.queue_manager.dlq_depth	Number of messages in dead letter queue	Count
Active channels	ibmmq.queue_manager.active_channels	Number of channels in an active current status	Count

Metric name	Metric key	Description	Unit
Channel instances	ibmmq.channel.instances	Number of instances of this channel. This metric is only available to server-connection channels.	Count
Current shared conversations	ibmmq.channel.current_sharing_convs	Number of conversations currently active on this channel instance. This parameter is returned only for TCP/IP server-connection channels.	Count

Metric name	Metric key	Description	Unit
Total pages	ibmmq.queue_manager.usage.pageset.total_pages	The total number of 4 KB pages in the page set. Available only on z/OS IBM MQ	Count
Expand count	ibmmq.queue_manager.usage.pageset.expand_cnt	The number of times the page set has been dynamically expanded since restart. Available only on z/OS IBM MQ	Count
Unused pages	ibmmq.queue_manager.usage.pageset.unused_pages	The number of pages that are not used (that is, available page sets). Available only on z/OS IBM MQ	Count
Persistent pages	ibmmq.queue_manager.usage.pageset.persistent_data_pages	The number of pages holding persistent data. Available only on z/OS IBM MQ	Count
Non-persistent pages	ibmmq.queue_manager.usage.pageset.nonpersistent_data_pages	The number of pages holding nonpersistent data. Available only on z/OS IBM MQ	Count
Free buffers	ibmmq.queue_manager.usage.buffer_pool.free_buffers	Number of free buffers in buffer pool. Available only on z/OS IBM MQ	Count
Percent of free buffers	ibmmq.queue_manager.usage.buffer_pool.percent_free_buffers	Number of free buffers as a percentage of all buffers in the buffer pool. Available only on z/OS IBM MQ	Percent
Total buffers	ibmmq.queue_manager.usage.buffer_pool.total_buffers	The number of buffers defined for specified buffer pool. Available only on z/OS IBM MQ	Count

Metric name	Metric key	Description	Unit
Bytes sent	ibmmq.channel.bytes_sent	Number of bytes sent	Byte
Bytes received	ibmmq.channel.bytes_rcvd	Number of bytes received	Byte
Buffers sent	ibmmq.channel.buffers_sent	Number of buffers sent.	Count
Buffers received	ibmmq.channel.buffers_rcvd	Number of buffers received.	Count

Metric name	Metric key	Description	Unit
Last message sent	ibmmq.channel.last_msg	Time when last message was sent, or MQI call was handled	Second
Network time short	ibmmq.channel.nettime_short	Amount of time, in microseconds, to send an end of batch request to the remote end of the channel and receive a response over a short period.	MicroSecond
Network time long	ibmmq.channel.nettime_long	Amount of time, in microseconds, to send an end of batch request to the remote end of the channel and receive a response over a longer period.	MicroSecond
XMIT queue time short	ibmmq.channel.xmitqtime_short	Time, in microseconds, that messages remained on the transmission queue before being retrieved over a short period.	MicroSecond
XMIT queue time long	ibmmq.channel.xmitqtime_long	Time, in microseconds, that messages remained on the transmission queue before being retrieved over a longer period.	MicroSecond

Metric name	Metric key	Description	Unit
Availability	ibmmq.listener.availability	Percentage this listener was running and available.	Percent

Metric name	Metric key	Description	Unit
Oldest message	ibmmq.queue.oldest_message	Age in seconds of the oldest message on the queue.	Second
Uncommitted messages	ibmmq.queue.uncommitted_messages	Number of handles opened by applications for output	Count
Last GET	ibmmq.queue.last_get	Time at which the last message was successfully read from the queue.	MilliSecond
Last PUT	ibmmq.queue.last_put	Time at which the last message was successfully put in queue.	MilliSecond
Short time indicator	ibmmq.queue.time_indicator_short	Amount of time that a message spent on the queue over a short period.	MicroSecond
Long time indicator	ibmmq.queue.time_indicator_long	Amount of time that a message spent on the queue over a long period.	MicroSecond

Metric name	Metric key	Description	Unit
Inhibit GET	ibmmq.queue.inhibit_get	Whether queue inhibits MQGET	Unspecified
Inhibit PUT	ibmmq.queue.inhibit_put	Whether queue inhibits MQPUT	Unspecified

Metric name	Metric key	Description	Unit
In-doubt	ibmmq.channel.in_doubt	Whether the channel is currently in doubt. 0 = No. 1 = Yes	Unspecified

Metric name	Metric key	Description	Unit
Enqueue count	ibmmq.queue.enqueue_cnt	Number of messages enqueued. This count includes messages that have been put to the queue, but have not yet been committed. Enqueue rate also comes with this metric.	Count
Dequeue count	ibmmq.queue.dequeue_cnt	Number of messages dequeued. This count includes messages that have been successfully retrieved (with a nonbrowse MQGET) from the queue, even though the MQGET has not yet been committed. Dequeue rate also comes with this metric.	Count

Metric name	Metric key	Description	Unit
Open input handles	ibmmq.queue.open_input_handles	Number of handles opened by applications for input	Count
Open output handles	ibmmq.queue.open_output_handles	Number of handles opened by applications for output	Count

Metric name	Metric key	Description	Unit
Publish count	ibmmq.topic.pub_cnt	The number of applications currently publishing to the topic.	Count
Subcription count	ibmmq.topic.sub_cnt	The number of subscribers for this topic string, including durable subscribers who are not currently connected.	Count

Metric name	Metric key	Description	Unit
Depth	ibmmq.queue.depth	Number of messages in queue	Count
Depth percentage	ibmmq.queue.depth_percent	Percentage of messages filling up queue	Percent

Metric name	Metric key	Description	Unit
Channel status	ibmmq.channel.status	Used to round up channel status counts for alerting and charting purposes	Unspecified

Metric name	Metric key	Description	Unit
Log utilization	ibmmq.queue_manager.log_utilization	Percentage estimate of how well the queue manager workload is contained within the primary log space	Percent
Log in use	ibmmq.queue_manager.log_in_use	Percentage of the primary log space in use for restart recovery	Percent
Log archive size	ibmmq.queue_manager.log_archive_size	Amount of space occupied, in megabytes, by log extents no longer required for restart or media recovery, but waiting to be archived.	MegaByte
Log reuse size	ibmmq.queue_manager.log_reuse_size	Amount of space occupied, in megabytes, by log extents available to be reused.	MegaByte
z/OS Total log data sets	ibmmq.queue_manager.total_log_data_sets	The total number of active log data sets.	Count
z/OS Full log data sets	ibmmq.queue_manager.full_log_data_sets	The total number of full active log data sets that have not yet been archived.	Count

Metric name	Metric key	Description	Unit
Availability	ibmmq.queue_manager.availability	Percentage of time queue manager was reachable and available to this extension. While a queue manager sometimes may be up and running, availability is within the context of this extension.	Percent
Uptime	ibmmq.queue_manager.uptime	Time in seconds since last time queue manager started	Second

Metric name	Metric key	Description	Unit
Long retries left	ibmmq.channel.long_retries_left	Number of long retry attempts remaining	Count
Short retries left	ibmmq.channel.short_retries_left	Number of short retry attempts remaining	Count

Metric name	Metric key	Description	Unit
Messages	ibmmq.channel.messages	Number of messages sent or received, or number of MQI calls handled.	Count
Batches	ibmmq.channel.batches	Number of completed batches	Count
In-doubt messages	ibmmq.channel.current_messages	Number of messages in-doubt	Count

Related to IBM MQ

OneAgent

The simplest way to capture all observation signals automatically and in context

ActiveGate

Route traffic, monitor clouds and remote technologies & run Synthetic monitors

IBM MQ

Monitor performance of your IBM MQ queue manager objects.

Full version history

To have more information on how to install the downloaded package, please follow the instructions on this page.

ReleaseDate

Full version history

Release notes:

⚠️ When migrating from any version below 3.5.x, please read 3.5.2 Release Notes

Changes in this version:

Short/Long retries channel metric adjustment.
Disable auto-alerting feature was added.
Task bucket size feature was added to optimize resource utilization across ActiveGates.
Fixed issue with a gap occurring once an hour for certain dimensions on channels.

Full version history

⚠️ When migrating from any version below 3.5.x, please read 3.5.2 Release Notes

Changes in this version:

Minor filters fix

Full version history

⚠️IMPORTANT CHANGE⚠️

This version takes filtering rules and evaluates them in sequential order. This allows you to enter more complex filtering rules based on results from the previous step.

For example:

Monitor all queues
Do not monitor queues that start with SYSTEM.
Monitor queues that start with SYSTEM.CLUSTER.
Do not monitor queues that start with SYSTEM.CLUSTER.TRANSMIT.

will evaluate them in that specific order.

Same as: *, -SYSTEM*, SYSTEM.CLUSTER*, -SYSTEM.CLUSTER.TRANSMIT.*

Make sure you review your rules when upgrading to this version to ensure they are ordered in the sequence you want to evaluate them
In case you need to change the order, there is no need to recreate rules. You can drag & drop them using your mouse over the dots next to each rule.

Other changes:

actual_qm_name property is in all entities.
Resolved "No KeepAlive from datasource Python" message in some specific instances that was causing restarts.
Resolved issue with channel metrics on z/OS that were not aggregating properly.

Full version history

Resolved java error on ConcurrentModification exception

Full version history

Resolved issue with channels showing incremental values.
Some large numbers display as negative.

Full version history

Note: All patches are cumulative. For a list of fixes and enhancements, please look at Release notes in previous releases.

In this release:

Resolved an issue on Windows Local deployments only where it could not find MQ libraries.

Full version history

Fixed an issue on z/OS and channel metrics coming in once an hour.
Fixed an issue where some dimensions regarding QSG were missing.
Fixed an issue where topology was not being sent.
Minor bug fixes

Full version history

Fixed issue that caused gaps in metrics.
Modified data collection to no longer require permissions to all objects but still optional when collecting data in bulk.
Added functionality to send a log event when multi-instanced queue manager switch hosts (failover). This allows the creation of alerting when failover occurs.
Minor improvements and bug fixes

Full version history

Resolves a java error dependency on java.time.Instant#seconds

Full version history

Credential Vault support was added.
Ability to Rename/Prefix queue managers allowing you to have same queue manager names from different environments or datacenters.
Minor fixes.

Full version history

Improved memory consumption.
Added Connection name list and Connected host properties to MQ objects (Remote deployment only).
Fixed non-ascii characters in description fields causing rejection.
Fixed issue causing extension initialization problems on some rare use cases.
Fixed an issue with filters no picking up new channels.

Full version history

Solved an issue with connections that gave a MQRC_QMGR_NAME_ERROR error

Full version history

Solved a communication error with cluster when sending Topology data.
Added Management zone support to metrics.
Added type of activation, configuration labels and description to Queue manager metadata for rapid configuration lookup.
Various UI fixes

Full version history

⚠️ For customers upgrading from versions 3.0.x, new entities will be created for all objects (queue managers, queues, channels, topics, listeners). You will see double entities temporarily, and it will fix itself over time. Your old entities will eventually fall off. Please update any references to any existing entities in any custom alert rules or any custom dashboards you may have created. This change does not affect customers coming from 1.x.x or 2.x.x versions. Please disregard this warning if you are not upgrading from 3.0.x.

Added support to Remote (ActiveGate) deployment, therefore consolidating activations.
Added Remote queues
Made adjustments to Unified Analysis screens to reflect new metrics and deployment.
Support for z/OS and AIX on Remote deployment only.
Fixed issue with circular dependencies in libraries.

Full version history

Fixed issue with Advanced Mode object collection

Full version history

Release notes:

Developed in Dynatrace's Extension Framework 2.0
New metrics.
New configuration screen.
New dashboards.
New filters.
Supports Alias queues.
New topic metrics.
New entities. You can now tag entities too.
New relationships.
Ability to select feature sets of metrics to collect.

12 Results

Found in 'All'

IBM MQ

Monitor performance of your IBM MQ queue manager objects.

RabbitMQ

Automatic end-to-end traces of producers and consumers for RabbitMQ

RabbitMQ
cloud
message-broker
message-queue

Amazon MQ

Managed message broker service for Apache ActiveMQ that makes it easy to migrate to a message broker in the cloud.

Amazon Web Services
cloud

Anypoint MQ

Gather metrics about your Anypoint MQ Queues

mq
anypoint
mulesoft

Apache ActiveMQ Classic

Automatic and intelligent observability for ActiveMQ with trace and metric insights.

activemq
message-broker
message-queue
queues
topics

Apache ActiveMQ Artemis

ActiveMQ Artemis observability with end-to-end producers and consumers tracers.

activemq-artemis
message-broker
message-queue

RabbitMQ (Management API)

Monitor your Clusters, Nodes, Virtual Hosts and Queues.

mq
RabbitMQ
2.0
management
python
rabbit

Microsoft Message Queuing (MSMQ)

Automatic and intelligent observability for MSMQ with end-to-end traces of connected producers and consumers.

msmq
message-broker
message-queue

Message Queues

Monitor message queues and quickly detect anomalies in critical apps.

ActiveMQ
IBM MQ
MSMQ
RabbitMQ
Apache Kafka

Prometheus

Open-source toolkit for monitoring and alerting on infrastructure metrics.

RabbitMQ
Apache Spark
CEPH
Confluent
couchbase
HAProxy
InfluxDB
Memcached
netapp
node-exporter
PowerDNS
Prometheus
Redis
ZFS

Prometheus in Kubernetes

Collect metrics from Prometheus exporters in Kubernetes for Dynatrace analytics

Custom Extensions Creator

Create custom extensions with a few clicks

custom queries
app
database
datasource
extensions
JMX
Prometheus
queries
query
snmp
snmptraps
sql
WMI